fermacell™ floor systems
fermacell™ floor systems offer exceptional surface hardness with a low installation height, as well as high load-bearing capacity despite their low weight. The dry layered construction allows the floor to be ready for finishing immediately and speeds up the overall progress of timber construction projects.
fermacell® flooring elements: no additional insulation required. Versatile screed panels.
fermacell® flooring elements with wood fibre insulation: Eco-friendly insulation. Soundproofing. Fire protection in the building structure.
Durable flooring elements offering reliable fire, sound and thermal insulation
fermacell™ floor systems combine high mechanical strength with a low installation height and low weight. As the installation process is carried out entirely without the introduction of moisture, swelling in moisture-sensitive substrates is consistently prevented.
This means the floor is ready for use immediately after the step joints have been bonded, significantly speeding up construction progress. The systems offer proven benefits in terms of sound and fire insulation and, thanks to their high point load-bearing capacity, can be used universally in all construction methods. This combination of technical performance and time savings makes them an efficient solution for new builds and refurbishments.
fermacell™ flooring systems are easy to install and save time, boosting productivity on your construction site.
Quick and easy to lay with easy-to-handle tiles – ready for carpeting after just one day.
No additional construction moisture recorded.
Low installation heights from 20mm combined with significantly lower weight.
A tried-and-tested system, certified for structural applications and sound and fire protection.
High fire resistance. Maximum flexibility.
fermacell® flooring elements meet the demanding requirements of modern interior construction.
Enhanced fire safety: Tried and tested for 60 minutes in the case of timber-beamed ceilings without additional layers in the event of the ceiling surface catching fire. By installing additional structures beneath the fermacell® flooring elements, 90 or 120 minutes feasible – ideal for meeting higher fire safety requirements in commercial construction.
Quieter living spaces: Achieves 63 dB airborne sound insulation and 53 dB impact sound performance - exceeding Building Regulations requirements by up to 18 dB.
ㅤSuitable for damp locations: Safe to use in Damp rooms in water exposure classes. Suitable for use in bathrooms, kitchens or utility rooms in residential and commercial buildings, for example.
ㅤCompatible with underfloor heating and floor coverings: Ideal for Hot-water underfloor heating systems.
Suitability for almost all standard surface finishes such as tiles, parquet, designer flooring or carpet.
Installation made easy – save time, ensure quality
Watch the video to find out how to install fermacell® fibre gypsum flooring elements efficiently and precisely – including expert tips for ensuring everything runs smoothly on site.
Technical Specifications & Documents
fermacell® fibre gypsum flooring elements: Everything you need to plan and optimise your projects.
Material properties of fermacell® flooring elements without additional insulation 2 E 11 (2 E 22)
Approval
ETA - 03-0006
Building material class according to EN 13501-1
A2fL – s2
Panel thickness [mm]
λ = 0.32 W/mK
Self-weight [kN/m²]
0.20 (0.25)
Thermal resistance [m²K/W]
0.06 (0.08)
*Trimming of 5mm per side recommended for optimal squareness, but not mandatory for technical integrity
Technical specifications for fermacell® fibre gypsum boards
Bulk density
1150 ± 50 kg/m³
Water vapour transmission rate
μ = 13
Thermal conductivity
λ = 0.32 W/mK
Specific heat capacity
c = 1.1 kJ/kgK
Brinell hardness
30 N/mm²
Swelling in thickness after 24 hours in water
< 2%
Coefficient of thermal expansion
0.001%/K
Expansion/shrinkage when relative humidity changes by 30% (20°C)
0.25 mm/m
Equilibrium moisture content at 65% relative humidity and an air temperature of 20°C
1.3%
pH value
7–8
fermacell® flooring element 2E31
Approval
ETA - 03-0006
Building material class according to EN 13501-1
BfL – s1
Panel thickness [mm]
30 (35)
Self-weight [kN/m²]
0.25 (0.31)
Thermal resistance [m²K/W]
0.26 (0.28)
Technical specifications for fermacell® fibre gypsum board
Bulk density
1150 ± 50 kg/m³
Water vapour transmission rate
μ = 13
Thermal conductivity
λ = 0.32 W/mK
Specific heat capacity
c = 1.1 kJ/kgK
Brinell hardness
30 N/mm²
Thickness swelling after 24 hours in water
< 2%
Coefficient of thermal expansion
0.001%/K
Expansion/shrinkage when relative humidity changes by 30% (20°C)
0.25 mm/m
Equilibrium moisture content at 65% relative humidity and an air temperature of 20°C
1.3%
pH value
7–8
Areas of application
No.
Category following BS EN 1991-1-1:2025
Point Load kN
Uniformly distributed or Live Load kN/m²
Areas for domestic and residential activities
Category A
1
Rooms in Residential Buildings and Houses (A1)*, Bedrooms and dormitories except those in self Contained single Family units and in Hotels and Motels (A2), Bedrooms in Hotels and Motels; Hospital Wards; Toilet Areas
A1/A2
2.0
2.0
Office Areas
Category B
2 to 3
General Use (B1), At or Below ground floor level (B2)
B1/B2
3.0
3.0
Areas where people may congregate
Category C
3 to 4
Areas with Tables. Public, Institutional and communal Dining rooms and Lounges, Cafés and Restaurants and Reading Rooms with Book Storage and Classrooms
C1- Areas with Tables
4.0
3.0
3 to 4
Assembly Areas with Fixed Seating Places of Worship
C2- Areas With Fixed Seats
4.0
4.0
4
Corridors, hallways, aisles in Institutional type Buildings NOT subjected to Crowds or Wheeled Vehicles, hostels, Guest Houses. Residential Clubs and Communal areas in Blocks of Flats, Stairs and Landings
C3 - Areas without obstacles for moving people
4.0
5.0
4
Assembly Areas without fixed seating. Concert Halls, Bars and Places of Worship
C5 - Areas Susceptible to Large Crowds
3.6
5.0
Shopping areas
Category D
4
Areas in General Retail Shops
D1
4.0
4.0
4
Areas in Department Stores
D2
7.0
5.0
*Table details have been extracted from the National Annex and serve as guidance only
FAQ
You can find clear answers to the most frequently asked questions in our FAQ section.
Dämmstoffe zur zusätzlichen Wärme- und Schalldämmung sowie für den Höhenausgleich unter fermacell® Estrichelementen müssen von fermacell® James Hardie dafür freigegeben sein. Unsere freigegebenen Dämmstoffe weisen die notwendige Festigkeit auf und sind auf die Eigenschaften der Estrichelemente und auf die geforderte Belastbarkeit abgestimmt. Eine Liste entsprechender Dämmstoffe finden Sie hier.
Zusätzliche Angaben zur Trittschallverbesserung sind im Handbuch:" fermacell®™ Bodensysteme - Planung und Verarbeitung" und in unserer Dämmstoffliste nachzulesen. Für sichtbare Holzbalkendecken wird zur effektiven Trittschallverbesserung u.a. das fermacell®™ Waben-Dämmsystem empfohlen.
Standardformate
Fliesen und Natursteinplatten mit einer Kantenlänge von maximal 330 mm dürfen grundsätzlich auf allen fermacell® Estrichelementen verwendet werden.
Werden Trittschalldämmplatten aus Mineralwolle oder mit Mineralwolle kaschierte fermacell® Estrichelemente verwendet, sind Naturstein- oder Terrakotta-Fliesen nicht zugelassen.
Auf fermacell® Gipsfaser Estrichelementen erfolgt die Fliesenverlegung im Dünnbettverfahren. Bei der Verwendung von fermacell™ Flexkleber kann auf eine Grundierung verzichtet werden. Auf fermacell® Powerpanel TE kann die Verlegung der Fliesen im Dünn- oder Mittelbettverfahren erfolgen. Bei der Verwendung von fermacell™ Flexkleber ist eine Grundierung (z. B. mit fermacell™ Tiefengrund) notwendig.
Großformatige Fliesen
fermacell® Estrichelemente sind für die Verlegung von Steinzeugfliesen mit unbegrenzter Kantenlänge geeignet. Bei der Verlegung sind einige Vorgaben zwingend einzuhalten. Weitere Informationen sind hierzu in der Fliesenliste zu finden.
Weitere notwendigen Angaben finden Sie in unserem Handbuch: "fermacell®™ Bodensysteme – Planung und Verarbeitung", sowie in der Unterlage: "Verarbeitungsrichtlinien Fliesenbeläge auf fermacell Bodensystemen". Für die Verklebung dürfen ausschließlich freigegebene Systeme eingesetzt werden. Hinweise finden Sie in der selbigen Unterlage.
Die fermacell® Estrichelemente eignen sich als Untergrund für die Direktverklebung von Mehrschichtparkett nach DIN EN 13489 (z. B. Fertigparkett-Elemente) und Mosaikparkett nach DIN EN 13488. Letzteres ist in einem Muster (z. B. Fischgrät- oder Würfelmuster) zu verlegen, da dies die Ausdehnung des Parkettfußbodens bei einer möglichen Quellung in verschiedene Richtungen ermöglicht.
Die Verarbeitung von Mosaikparkett in einer anderen Verlegerichtung oder die Verwendung anderer Massivholzsorten und Parkettarten darf nur nach Freigabe des Klebstoffherstellers erfolgen. Informationen zu Parkettklebern finden Sie auch in unserer Empfehlungsliste.
Weitere Hinweise finden Sie in unserem Handbuch: "fermacell® Bodensysteme - Planung und Verarbeitung".
Es können verschiedene elastischen Bodenbelege auf fermacell® Estrichelementen verlegt werden, wie Teppich, Laminat, Kork, PVC, Linoleum, Elastomer, LVT-Designbeläge.
Genauere Infomationen dazu finden Sie in der technischen Dokumentation: "Verarbeitungsrichtlinien elastische Bodenbeläge auf fermacell™ Bodensystemen".
Mit fermacell® Estrichelementen kann aufgrund des Stufenfalzes auch im Bereich von Türdurchgängen eine feste (kraftschlüssige) Verbindung hergestellt werden.
Related products
From screws to fillers: everything you need for a smooth installation and the best results.